⚡ Versatile application for hotels, residential buildings, hospitals, schools, etc.
⚡ Standardized housing with 19 sizes; supports up to 92 modular components.
⚡ User-friendly design with self-locking plastic panel for easy operation.
⚡ Comprehensive protection against overload, undervoltage, short circuit, and leakage.
⚡ Aesthetic options with decorative panels: blessings, landscapes, and creative designs.
Item NO. :
PZ30Certificate :
CQCLead time :
20 DaysPayment :
T/TMOQ :
≥1Warranty :
1 YearPZ30 Lighting Distribution Box
Enecell is a famous China PZ30 Electric Lighting Power Box Manufacturers and Lighting Distribution Box Suppliers, The PZ30 Lighting Distribution Box offers versatile applications, user-friendly design, and comprehensive protection, making it an ideal choice for modern buildings.
Product Overview
LPZ30 modular terminal combined distribution box is suitable for single-phase three-wire or three-phase five-wire terminal circuits with AC 50Hz, rated working voltage up to 400V and below, and total current not more than 125A. It is a complete set of devices that control electrical equipment and protect against overload, short circuit, overvoltage and leakage. It is widely used in high-rise buildings, hotels, residences, stations, ports and airports, hospitals, theaters, large commercial outlets and industrial and mining enterprises. This product complies with relevant standards such as IEC61439 and GB/T7251 "Low-voltage complete switchgear and control equipment".
This product complies with relevant standards such as IEC60439-1, GB7251 "Low-voltage complete switchgear and control equipment" and GB/T 24274 "Low-voltage withdrawable complete switchgear and control equipment".
Product Model Meaning
Normal Use Environment Conditions
1. The ambient air temperature is not higher than +40℃, not lower than -5℃, and the average temperature within 24 hours is not higher than +35℃. The equipment should be used at reduced capacity when it exceeds the above environment.
2. The relative humidity does not exceed 50% when the maximum temperature is +40℃. A higher relative humidity is allowed at a lower temperature, such as 90% at +20℃. The influence of condensation that may occur accidentally due to temperature changes should be considered.
3. The installation site is usually installed at an altitude of no more than 2000m. For places above 2000m, the capacity should be reduced accordingly.
4. Install in places without fire, explosion hazard, severe dust, chemical corrosion, severe vibration and impact.
5. If the above conditions cannot be met, the user and the manufacturer should negotiate to resolve.
Main Technical Parameters
Serial number | project | Reference | |||||||||||||||||||||
1 | Rated insulation voltage | 400V/AC | |||||||||||||||||||||
2 | Rated operating voltage | 380V/220V/AC | |||||||||||||||||||||
3 | Overvoltage level | Ⅱ | |||||||||||||||||||||
4 | Pollution degree | 2 | |||||||||||||||||||||
5 | Rated frequency | 50Hz | |||||||||||||||||||||
6 | Rated current | Up to 125A | |||||||||||||||||||||
7 | Rated time withstand current | Up to 10kA | |||||||||||||||||||||
8 | Rated peak withstand current | Up to 20kA | |||||||||||||||||||||
9 | Protection level | Up to IP40 | |||||||||||||||||||||
10 | Equipment height | 260,420,605mm | |||||||||||||||||||||
11 | Device Width | 257,327,398,470mm | |||||||||||||||||||||
12 | Equipment Depth | 80-100mm |
Note: Other structural dimensions can be customized according to customer requirements.
Structural features
1. This product has the characteristics of modular component size, rail-based installation, artistic appearance, and safe use. It can be mounted on the wall or embedded, and can be operated and maintained from the front.
2. This product is a steel-plastic or semi-plastic or fully plastic structure. The box base is made of high-quality cold-rolled steel plate by bending and welding (stainless steel base and plastic molding base can also be provided according to customer needs). The end cover is made of flame-retardant engineering plastic injection molding and is equipped with a transparent polycarbonate protective cover; it has both plastic artistic beauty and the firmness of steel structure.
3. The internal components are compactly and reasonably arranged, and installation, disassembly, and maintenance are quick and convenient. The circuit breaker operating handle is exposed, and the live and other parts are covered inside the upper cover. It can be easily operated by opening the door, and it is safe and reliable to use.
4. The box door is connected to the box body with multiple strands of soft copper wire to form a complete grounding protection circuit.
5. The surface of the box body adopts high-voltage electrostatic spraying technology. Strong adhesion, good texture, beautiful and durable.
Concealed box dimensions and installation dimensions
8P | 10P | 12P | 15P | 18P | 20P | 24P | 30P | 36P | 40P | 45P | 54P | 60P | ||||
Appearance R size (mm) |
Mindfulness | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||
High |
260 | 260 | 200 | 260 | 260 | 260 | 420 | 420 | 420 | 420 | 605 | 605 | 605 | |||
Width | 257 | 327 | 327 | 398 | 470 | 470 | 327 | 398 | 470 | 470 | 398 | 470 | 470 |
External dimensions and installation dimensions of exposed box
number | 8P | 10P | 12P | 15P | 8P | 20P | 24P | 30P | 36P | 40P | 45P | 54P | 60P | |
Dimensions (mm) | Depth | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 |
High | 260 | 260 | 260 | 280 | 260 | 260 | 420 | 420 | 420 | 420 | 505 | 805 | 605 | |
Width | 257 | 327 | 327 | 398 | 470 | 470 | 327 | 398 | 470 | 470 | 398 | 470 | 470 | |
Installation size (mm) | A | 207 | 277 | 277 | 348 | 420 | 420 | 277 | 348 | 420 | 420 | 348 | 420 | 420 |
B | 210 | 210 | 210 | 210 | 210 | 210 | 370 | 370 | 370 | 370 | 555 | 555 | 555 |
Ordering Instructions
When ordering, the user should provide the following information:
1. Primary system diagram.
2. Model, specification and quantity of main electrical components in the equipment.
3. Inlet and outlet line method and cable specification, whether there is T connection in the box.
4. Surface color of the equipment.
5. Other special requirements should be negotiated with the manufacturer.
Product Packaging
Hot Tags :
Can't Find Target Products? contact us!